| Amperage Rating | : | 0.48 A |
| Configuration | : | Normally Open, Normally Closed |
| Connection Type | : | Press |
| Dimensions | : | 3-1/8 in L x 2-3/8 in W |
| Flow Coefficient (Cv) | : | 9.5 Cv |
| Material | : | Brass |
| Nominal Size | : | 3/4 in |
| Number of Ways/Position | : | 2-Ways |
| Power Rating | : | 11.4 W Charging, 1.44 W Power-On |
| Pressure Rating | : | 300 psi |
| Seal Material | : | EPDM |
| Seat Material | : | PTFE |
| Stem Material | : | Brass |
| Temperature Rating | : | 135 deg F |
| Trim Material | : | Chrome-Plated Brass |
| Voltage Rating | : | 24 VAC |
The Taco zone Sentry® zone valve enhances the overall performance of any zone valve system. The unique patented technology in the zone sentry utilizes a microcircuit-based logic to control a gear driven electronic actuator which drives a ball valve-based body design. All this adds up to a zone valve that leads the industry in energy efficiency, flow capacity (Cv), shut-off pressure rating, ease of installation, diagnostic capability and the number of valves (12) that can be use on a standard 40 VA transformer.
Taco Comfort Solutions® Zone Sentry Zone Valve, 3/4 in Nominal, Press Connection, Number of Ways/Position: 2-Ways, 300 psi, 9.5 Cv Flow Coefficient (Cv), Brass Stem, Chrome-Plated Brass Trim, PTFE Seat, EPDM Seal, Brass, Normally Open, Normally Closed, 0.48 A, 24 VAC, 11.4 W Charging, 1.44 W Power-On, 135 deg F, 3-1/8 in L x 2-3/8 in W
- The ball valve installs in any orientation
- Multi-function LED
- Quick-connect wiring
- Manual override
- 90 deg turn approximately 5 s ball rotation speed
- 1 A at 24 VAC end switch rating
- 0.5 a heat anticipator setting
- Brass press ring and brass (chrome-plated)
- High-performance engineered polymer body, high-performance internally lubricated engineered polymer gears actuator
- Two pin screw connectors for power and end switch